| Specifications |
| Printing Method: | Thermal Direct |
| Dots Per Line: | 576 (203 dpi) |
| Printing Width: | 70mm |
| Resolution: | 8 dots/mm |
| Printing Speed: | Up to 2 ips |
| Head Temperature Detection: | By thermistor, hardware protection against overheating |
| Paper-Out/TOF Detection: | By photo interruptor |
| Current Consumption: | 3.8A at 64 dots |
| Standard Operating Features |
| Character Set: | ASCII International, IBM Graphic, and 1 downloadable set |
| Graphic Print: | Bit addressable graphic command set: Bar codes 39, 128, 2 of 5, UPC, Graphic logo store and print |
| Supervised Operation: | Supervisory command set to read battery voltage, buffer status, power management and data transfer |
| Line Buffering: | 32k standard |
| Print Contrast: | Auto and user selectable |
| Print Output: | Double high, double wide and bold print |
| Communication |
| Interface: | Standard - Serial RS-232 with modular connector (6 pin), Infra-Red (IrDA) up to 38.4K transmission speed with ambient light filter or Bluetooth. Optional - Magnetic Card Reader (3 track, simultaneous read); Smart Card Reader |
| Baud Rate: | 2400, 4800, 9600, 19,200, 38,400 baud, dip switch set |
| Fast IrDA Transfer Speed: | Up to 38.4K depending on computer compatibility |
| Std. IrDA Transfer Speed: | 9600 connect and transfer |
| Handshaking: | CTS/RTS and or XON/XOFF; MS-DOS and Windows compatible with full-speed handshake; Windows 95®, 98®, Xp and 2000 printer drivers; Windows CE print application; Windows CE and Pocket CE print driver from fieldsoftware.com;Palm O/S print driver from Bachmann Software or stevenscreek.com |
| Power |
| Power: | Internal rechargeable battery and wall mount DC power pack |
| Battery: | 5 cell NiMH 1500 mAH rechargeable |
| DC Power Pack: | 9vdc/1.4A |
| Battery Recharge: | Internal 90 minute fast charge with auto switch to trickle charge; Over current and overheat protection |
| Power ON/OFF: | Via switch or by raising RTS (ON) or lowering RTS (OFF); Auto power switch down timer |
| User Interface |
| Status Indicators: | 3 LEDs |
| User Switches: | 2 membrane switches Power ON/ OFF, Feed |
| Connection: | Modular (6 pin) for Data I/O; DC input Power Jack for wall mount adapter; Infra- Red (IrDA) with Ambient Light Filter, or Bluetooth. |
| Mechanical |
| Dimensions: | 121x152x57mm (4.75x6x2.5") WxLxH |
| Weight: | 580g (20oz) with paper and battery pack |
| Warranty: | 1 year printer; 6 months or 1 million inches on printhead; batteries, 90 days |
| Environmental Specifications |
| Operating Temperature: | -10° to 50°C |
| Storage Temperature: | -20° to 60°C |
| Humidity: | Up to 85% RH (non-condensing) |
| Drop Test: | 4 feet |
| Agency Approvals: | FCC Part 15J Part B; CE EN55022 Part B, EN50082-1 |
| Print Media |
| Paper Width: | 80mm (3.125") |
| Lines of Print/Roll: | 4400 (1.4" diameter roll, 0.4" core, approx. 45 feet long |
| Paper Rolls Per Charge: | ~6 |
| Specifications subject to change without notice |
