| MB200i - General Specifications |
| MODEL | MB200i |
| PRINTING SPECIFICATION |
| Print Method: | Direct Thermal/Thermal Transfer |
| Print Resolution: | 203 dpi (8 dpmm) |
| Print Speed: | Max up to 4"/s (103 mm/s) at 16% printing coverage
Default Print Speed is 3"/s (75 mm/s) |
| Max. Print Area: |
| Width: | 1.89" (48 mm) |
| Length: | 6.3" (160 mm) |
| MEDIA SPECIFICATION |
| Sensor Type | Reflective Sensor (for use with pre-printed marks) Adjustable See-Through Sensor (for die-cut label with gap) Dispenser Sensor |
| Media Type | Roll die-cut label with gap or pre-printed label, 2 Color direct thermal, Linerless media |
| Media Size |
| Width: | 1.1" - 2.2" (28 mm - 57.5 mm) includes backing liner |
| Length: | 0.63" - 6.4" (16 mm - 163 mm) includes backing liner |
| Thickness: | 0.003" - 0.007" (0.064 mm - 0.19 mm) |
| Outer Diameter: | 2.63" (67 mm) |
| Inner Diameter: | 0.75" (19 mm) for standard labels or 0.31" (8 mm) coreless for receipt paper |
| FONT / SYMBOLOGIES |
| Font |
| Internal Fonts: | XS, XM, XB, XL, OCR-A, OCR-B |
| Barcode Symbologies |
| Linear: | UPC-A/E, UCC/EAN-128, Interleaved 2 of 5, CODE 39, CODE 128, EAN-8/13, CODE 93, RSS-14, POSTNET, NW-7 |
| 2-Dimensional: | Data Matrix, PDF417, Maxicode, Composite Symbology, QR Code |
| INTERFACE CHARACTERISTICS |
| Interface Options | RS232C, IrDA (Ver.1.2, Standard Protocol, BHT Protocol, IrCOMM (3-wire cooked), IrOBEX (option)), Bluetooth Ver1.1, 802.11b Wireless LAN (Supports WEP 64/128bit, WPA, 802.1x, WPA-PSK, EAP) |
| OPERATING CHARACTERISTICS |
| Battery: | 7.4 V (2400mAH) Lithium Ion |
| Environment |
| Operating | 5º F - 122º F (-15º C - 50º C), 30%-80% RH, non-condensing |
| Storage | -13º F - 140º F (-25º C - 60º C), 30%-90% RH, non-condensing |
| Regulatory Approvals | FCC Class A, UL, CE, TÜV, GSA |
| Dimensions | 3.5" (88 mm) L x 5.03" (128 mm) W x 2.9" (73 mm) H |
| Weight | 0.9 lbs. (405 g) with battery installed |
| Drop Specification | 6 ft. (1.83 m) - flat sides of printer to concrete |
| OPTIONAL ACCESSORIES |
| Battery Charger (Single and Multi-Battery Capabilities), Spare Battery, AC Adapter, Serial to PC Cable, Weather-Resistant Carrying Case, Holster, Optional Swivel Belt, Optional Shoulder Strap |
| OPERATIONAL FEATURES |
| Firmware Features Auto Power Save. Printer enters sleep mode when idle for 5 seconds. Printer will power off automatically when idle for another 5 minutes. (Programmable power off feature) Self Diagnosis Tools Head Check, Battery Balance Check, Paper End, Head Open, Test Print, MB200i has additional over charge/discharge protection |
| *Specifications subject to change without notice |
