The CAT-40G Label Rewinder is a High Torque Label Rewinder.
The CAT-40G Gear Driven Label Rewinder is a large roll diameter Label Rewinder. With a gear driven motor, high torque power supply and large roll diameter there is no job too big for this jumbo power house. Optional Sensor Arm technology for stopping and starting the Rewinder makes this Rewinder ideal for winding up nice tight large rolls of material.
The Constant Adjustable Torque (CAT) technology has made the silent, easy-to-use CAT-3 the “Industry Standard” Label Rewinder. There are no awkward troublesome belts or clutches.The CAT-3-STANDARD handles labels up to 6″ wide and will wind a roll of labels up to a 11″ diameter. Torque and Direction are fully controllable from the Control Panel. Dual torque ranges provide plenty of power for use with a LABELMATE Slitter, too.
With an unmatched 5-Year Parts and Labor Limited Warranty, all Labelmate Rewinders are designed for worry-free 24/7 operation.
About the Manufacturer: Since 1997, Labelmate has been the source for quality Label Rewinders, Unwinders, Dispensers, Counters, Slitters, Print Mechanisms & Core Chucks worldwide. Labelmate’s sales, support, product engineering, and manufacturing operations is based in Henderson, Nevada, USA, with products available in more than 70 countries around the world.
|Shaft Style||Quick Chuck|
(Inches Per Second)
|Max Label Width||6"||8.6"||10"||6"||8.6"||10"|
|Max Label Roll Diameter||16"|
|Max Label Roll Weight||32lb|
|Dimensions||20 x 20 x 12 in|
What are the different shaft styles?
Quick Chuck Shaft
Fin Shaft - A fixed shaft that can only fit one label core size. Fin shaft include a 1" core and a 3" core option.
Adjustable Shaft - An adjustable shaft that can be changed to fit multiple core sizes. Fits 1", 2", 3", and 4" cores.
Coreless Shaft - This shaft allows you to roll labels without a core since it rolles directly onto the metal shaft. This option comes with a rewind bail. The rewind bail is a metal rod that lies on top of the label roll and applies pressure on the labels as the rewinder rewinds labels.
Quick Chuck Shaft - Quick Chucks provide a quick and easy way to handle the cres you put your label or other material on. These quick-locking, quick-release core holders allow you to change out cores quickly and safely without worrying if the material will slip off when removing a full roll from the Core Holder.
What exactly is a label rewinder?
A Label Rewinder winds up printed labels into a neat roll as they come out of a printer. This is the efficient, low-cost alternative to winding labels up by hand, or to letting them fall on the floor to be picked up later. A Rewinder quickly pays for itself in time saved, and prevents needless frustration when winding up labels.
What is 'Core Diameter'?
Core diameter is the size of your label core. Common sizes are 1" and 3". Different shaft styles will be able to fit different core sizes.
What is Inch Per Second (IPS)?
Inch Per Second is the measurement of speed for how fast a printer can print or how fast a rewinder can rewind. Higher IPS means the printer can print more labels in one second.
Example: A printer with 6 IPS means it can print 6 one inch labels in one second , 3 two inch labels in one second, or 2 three inch labels in one second.
What printer can I use with a label rewinder?
Rewinders will work with any brand of printer at any speed. Rewinders automatically adjust to the speed of your printer. When the printer stops, your Rewinder also stops and waits for the printer to resume. No damage will occur to your Rewinder even if it is left indefinitely in the stopped condition with power applied. Rewinders automatically allow your printer to backfeed if required. You can also use a Rewinder to rewind labels printed on a dot matrix printer, for example to rewind address or product labels. For ink-jet printers you’ll find the CAT-3-TA Rewinder with the a Tension Arm is the best Rewind solution in the industry.
When should I use a label rewinder?
A label rewinder should be used anytime you print a large volume of labels. Collecting 100 labels that printed directly onto the ground can be cumbersome — a rewinder can collect and organize labels instantly as they come out of a printer.
Do you guys carry more products?
Yes! We are always trying to add more products from other popular manufacturers like Zebra, Brother, Sato, Motorola, and much more. In the mean time, please contact us for any questions, information, or pricing on a product not listed on this website.
Do you offer bulk discounts?
Yes, please contact us directly about bulk discounts on hardware, labels, ribbons, or software.
I see a typo/error/mistake — what should I do?
Please tell us! We're human beings and sometimes mistakes are made. If you spot a typo, error on data specifications, or something that looks out of place then please contact us. We'll do our best to fix our mistakes as soon as possible.
Is it possible to try a product before we buy it?
Please contact us for products to test. Some products may require having a credit card on file before shipping out a demo unit.
Where is the price?
Unfortunately, we are unable to list actual pricing due to restrictions. Fortunately, because of our partnerships with manufactures, we are able to offer amazingly low prices on many products. To receive the best price, please contact us and we will do our best to beat our competitor’s price.
To be honest, we probably won’t be able to beat everybody’s price but we promise that you’ll be happy with the solutions and services we can provide.
Who is All Barcode Systems?
Find out in 90 seconds:
- We have over 3 decades of expertise & knowledge.
- We’re different from other companies — we’ll show you all your best options, how to use something, & be your first line of support.
- We offer products at BETTER prices on most items due to our business relationships with manufacturers and their distributors.
- We’ll do our best to beat all of our competitor’s price.